HTB-3100AB Optical Fiber Ethernet Media Converter Single Fiber Converter 25km SC 10/100M 1 Pair

HTB-3100AB Optical Fiber Ethernet Media Converter Single Fiber Converter 25km SC 10/100M 1 Pair

Feature

1.Working temperature : 0 ~ 50 degree;Storage temperature : – 40 ~ 70 degree ;
2.An RJ45 ports and a single-fiber SC optical port , to achieve optical signal conversion between 10/100base TX twisted pair(Ethernet )and 100base FX (fiber optic) ;
3.Core optical fiber can be completed in just one way signal transmission compared to dual fiber optic data transmission mode to improve the quantity doubled ;
4.Has 10M/100M adaptive capacity ;
5.Compliance with IEEE802.3 10Base-T and IEEE802.3u 100Base-TX, 100Base-FX standards ;
6.Ethernet interface can adaptively direct line / crossover cable connection ;
7.Support full / half duplex mode ;Support IEEE802.3X duplex flow control and half-duplex backpressure flow control ;Supports broadcast storm prevention function ;
8.1916 Byte support large data frame ( optional ) ;Built- in lightning protection circuit , which can greatly reduce the damage caused by lightning induction ;
9.There are six LED indicators : Power, TX 100, TX Link / Act, FX 100, FX Link / Act, FDX / Col; easy to monitor the working;status of the transceiver and determine the cause of the fault ;
10.Outer Dimensions: 95mm × 71mm × 25mm

Description:

NET – LINK HTB – 3100ab single mode single fiber transceiver product can save half of the fiber, the data on a single fiber and the 10/100 m rate of receiving and sending, where the optical fiber resource is very applicable.

Parameters:

Follow the IEEE 802.3, IEEE 802.3u and 100Base-FX standards

10/100Mbps data transfer rate

Support full-duplex and half-duplex way of working

Provides a standard RJ45 interface and SC fiber interface

RJ45 interface supports both 10Mbps and 100Mbps auto-negotiation function

RJ45 interface with fast switch function

EMI Certification: CE, FCC, VCCI, C-Tick

Fiber Type Singlemode

SC fiber optic interface type

Wavelength 1310nm 1550nm

Transmission distance 25Km

Maximum transmit optical power -12.0 dBm

Minimum emission power -19.0 dBm

Sensitivity -34.0 dBm

15.0 dBm optical fiber link loss

LED Description:

LED Colour Function

FX 100 Green Lit when 100Base-FX operation

FX Link/ACT Green Lit when fiber cable connection with remote device is good. Bliks when any FX traffic is present

Power Green Lit when +5V Power is available

FDX/Col Green Lit when full duplex mode is enabled. Blinking when collision is present

TX 100 Green Lit when 100Base-TX cable operation

TX Link/ACT Green Lit when TP cable connection with remote device is good. Blinks when any traffic is present

Package List:

1pair * Htb-3100 A/B
1pair * Power adapter